XRH7000 vehicle mount touch computer and monitor
A fanless aluminium touch computer for forklifts, trucks, tractors, cranes and boats, run straight from 8–36 V DC vehicle power. In use in mining, ports, forestry, warehousing and agriculture.

The standard choice is selected. Choose what you need.
Specifications
* A guide. The temperature a product runs at depends on how and where it is installed: processor load, airflow and clearance behind it, the cabinet or enclosure it sits in, sunlight and the air around it. One figure cannot cover every installation. Tell us about yours and we will confirm what suits it.
Standard on every XRH7000
- Aluminium enclosure, fanless
- 8–36 V DC power input
- 4-pin and 12-pin Deutsch DT automotive connectors
- IP67 / IP68 connectors (NEMA 6 equivalent)
- Night mode: dims with the headlight switch
- RAM ball mount on VESA 75
- TPM 2.0
- Network boot (PXE)
Downloads
Where it is used
- Runs from a 12 V car or 24 V truck supply and keeps running through engine starts.
- Deutsch DT automotive connectors for power, serial and IO, for an auto electrician to fit.
- Fanless, with an SSD, so it copes with vibration, dust and airborne particles.
- RAM ball mount on a VESA 75 plate, for a place in the cab within the driver's reach.
- Also as a touch monitor, or a KVM monitor up to 100 m from its computer over one CAT6 cable.
About the XRH7000
The XRH7000 G5 is a vehicle mount touch computer for forklifts, trucks, tractors, cranes, cars and boats: a fanless aluminium enclosure with an SSD, built for vibration, dust and airborne particles, and an 8–36 V DC input that runs from a 12 V car or a 24 V truck supply and rides through engine starts. It is made from 8.4" to 15.6" with resistive touch (PCAP from 10.4"), on an Intel Generation 11 processor or ARM RK3588S, running Windows 11 IoT Enterprise LTSC, Linux or Android 13.
Power, serial and IO arrive on Deutsch DT automotive connectors for an auto electrician to fit; a RAM 1.5" ball on a VESA 75 plate puts the screen within the driver's reach. Options are chosen on this page: CAN bus, serial ports, Ethernet, dual-band Wi-Fi, Bluetooth, 4G or 5G RedCap cellular (eSIM), GPS, speakers and a brighter screen for the cab. The XRH7000 is proven in forestry, mining, ports, rail yards, warehousing and agriculture, and is also sold as a touch monitor or a KVM monitor.
As a touch monitor or KVM monitor
The XRH7000 is also made with no computer inside. As a touch monitor it shows the picture from a computer or PLC nearby and sends the touch back to it. As a KVM monitor it takes video and touch from its computer up to 100 m away over one CAT6 cable, so the computer can stay in a dry, clean room.
Both use the same enclosure as the XRH7000 touch computer, in 8.4" to 15.6". Choose Touch monitor or KVM monitor under Type above to see the model codes and the video inputs, or compare every range on the touch screen monitors page.
XRH7000 by screen size
Talk to our New Zealand team.
Tell us where it has to work and what it has to do, for a quick reply.
STX Technology worldwide
Talk to our New Zealand team, with STX Technology in New Zealand, Australia, the UK and North America.
